BYS51防爆防腐全塑荧光灯 BYS全塑荧光灯 防爆防腐全塑荧光灯

1. 1区、2区或20区、2l区、22区危险场所；
2. ⅡA、ⅡB、ⅡC类爆炸性气体环境或可燃性粉尘环境；
3. 户内、户外(IP54,IP65*订购时提出)
1. Hazardous: division l&2or zone 20, 21, 22;
2. Explosive gas atmospheres: class ⅡA, ⅡB,
ⅡC or flammable dustatmospheres;
3. Indoor or outdoor(IP54,IP65*indicate as it is ordered)

1. 外壳采用高强度的SMC模压成型，灯罩采用透光性能好、耐强；冲击的聚碳酸酯注塑成型，外形美观；
2．外壳采用密封结构，具有良好的防尘、防水、 防强腐蚀等性能；
3. BYS51-Q-40X2 型是我厂新开发的灯具，内装电子镇流器为我厂特制的防爆镇流器，具有短路和开路保护性能，针对灯管的老化效应和漏气现象配有预防电路，使灯具能正常工作，且高效节能COSΦ≥0．95,具有宽电压输入，在
电压170~250V范围染能保持恒功率输出；
4. 电子镇流器配用灯管为普通形T8灯管，降低了用户的维修费用；
5. 配电感镇流器采用单脚快速瞬时启动灯管；
6. 可根据用户要求配装应急装置，当外界断电时，灯具自动切换到应急照明状态；
7. 电缆或钢管布线(钢管布线时请注明)。
8.符合GB3836-2000,IEC60079标准要求.
1. The shell adopt high intensity SMC moulded structure, the cover adopts poly carbonate ester that with good photic and impact resistance feature.
2. The shell adopt sealing structure and is with water & dust proof and seriouscorrosion proof function.
3. Lamp of type BYS51-Q-40X 2 is a product of our new design, built-in electronic ballast, it's with short circuit, plough protection function, the defend circiut is used foravoiding the aging or blow phenomena, the pow factor: COS Φ>0.95 wide voltage input lt can keep constant power output within 170~250V.
4. Electronic ballast fits with normal T8 lamp tube so it saves the maintenance expense.
5. Fit induction ballast adopts single pin to turn on the tube instantly.
6. It can be fixed with emergency set the illumination can convert to emergencylighting state.
7. Tube or cable wiring (please note tube wiring).
8.Suitable for GB3836-2000,IEC60079standard request.