进口低温电磁阀

If you want Shanghai Heng Yi company (import cryogenic solenoid valve) technical parameters information, please call for German LOCKE import cryogenic solenoid valve,

一、进口低温电磁阀描述：

import cryogenic solenoid valve description:

德国《LOCKE》洛克--进口低温电磁阀（Temperature solenoid valve ）是指用于温度在-40℃至-196℃低温介质的管道系统，如液化天然气，液化氧气，液化氮气，LNG，低温介质的电磁阀。

The German "LOCKE" LOCKE - low temperature solenoid valve (Temperature solenoid valve) refers to the temperature in the pipeline system of -40 DEG C to -196 low temperature medium, such as liquefied natural gas, liquefied oxygen, liquid nitrogen, LNG, electromagnetic valve cryogenic medium.

产品名称 进口低温电磁阀 产品型号 LOCKE

imported cryogenic solenoid valve, model LOCKE

产品品牌 德国《LOCKE》洛克 产品包装 木箱

Product brand, Germany "LOCKE", LOCKE product packaging wooden box

驱动方式 电磁驱动 公称通径 DN1～DN300

Drive mode electromagnetic drive nominal diameter DN1 ~ DN300

连接方式 螺纹、法兰、焊接 公称压力 0～300.0Mpa

Connection mode, thread, flange, welding nominal pressure 0 ~ 300.0Mpa

结构形式 先导式、直动式、分布直动式、活塞式 适用温度 -200℃

Structure type, pilot type, direct acting type, distributed direct motion type, piston type, suitable temperature -200 DEG C

阀体材质 不锈钢 制造标准 德国洛克原厂标准

Body material stainless steel standard, German LOCKE original factory standard

适用介质 液氮、液氨、制冷剂等超低温液体或气体等。

Applicable to medium, liquid nitrogen, liquid ammonia, refrigerant and other ultra low temperature liquid or gas.

应用场合 电站、冶金、建筑、锅炉、设备、管道、热能、空调、消防、给排水、水处理、石油化工、造纸印刷厂。

Applications: power station, metallurgy, building, boiler, equipment, pipeline, heat energy, air conditioning, fire fighting, water supply and drainage, water treatment, petrochemical, paper making and printing plant.

产品报价 面议，电议（欢迎来电咨询 021-51870709 ）

Price negotiable, dianyi (welcome to inquire 021-51870709)

产品产地 德国

Product origin Germany

生产厂家 德国洛克阀门国际集团

Germany LOCKE valves international group

指定代理 上海衡意流体控制有限公司（中国一级代理商及上海办事处）
Designated agent Shanghai Heng Yi fluid control Co., Ltd. (China level agents and Shanghai Office) 
二、进口低温电磁阀技术参数：
two, import low-temperature electromagnetic valve technical parameters:

公称通径 DN1～300mm

Nominal diameter DN1 to 300mm

原理结构 先导活塞式

Principle, structure, pilot, piston type

环境温度 -10～+50℃ -40～+80℃

The environmental temperature is -10 to +50, and the temperature is between -40 and +80 degrees centigrade

线圈温度 <+50℃、<+85℃

The coil temperature is <+50 DEG C and <+85 DEG C

控制方式 常闭、常开、自保持

The control mode is normally closed, normally open and self maintained

公称压力 0.1～160Mpa

Nominal pressure 0.1 ~ 160Mpa

阀体材质 铸钢、不锈钢304、316

Body material: cast steel, stainless steel 304, 316

适用介质 液氮、液氨、制冷剂等超低温液体或气体

Applicable to medium, liquid nitrogen, liquid ammonia, refrigerant and other ultra low temperature liquid or gas

介质温度 -200℃

Medium temperature -200 DEG C

介质粘度 小于50CSt （大于50时需定制）

Medium viscosity is less than 50CSt (greater than 50) to be customized

防护性能 防水、防尘、防爆（Exd IICT5）、防腐

Protection performance, waterproof, dustproof, IICT5 (Exd), antisepsis

阀芯材质 均为不锈钢

The material of the valve core is stainless steel

接线方式 接线座式、引线式、插头式

Connection mode, wiring seat type, lead type, plug type

电源电压 DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

Power voltage DC12, DC24V, DC36V, DC110V, DC127V, DC220V, DC380V;

AC24V、AC36、AC110V、AC127V、AC220V、AC380V

AC24V, AC36, AC110V, AC127V, AC220V, AC380V

连接方式 法兰、内螺纹、外螺纹、卡套、焊接

Connections, flanges, internal threads, external threads, sleeves, welding

泄 漏 量 零泄漏

Leakage zero leakage

备 注 特殊型可定制 1、公称通径：DN1-300mm

Note special type can be customized 1, nominal diameter: DN1-300mm

2、公称压力：PN1.0-300Mpa

2, nominal pressure: PN1.0-300Mpa

3、介质温度：-40℃至-196℃

3, medium temperature: -40 DEG C to -196 DEG C

4、使用介质:液氮、液氨、制冷剂等超低温液体或气体

4, the use of media: liquid nitrogen, liquid ammonia, refrigerant and other ultra-low temperature liquid or gas

5、电压偏差:正、负10%

5 、 voltage deviation: positive and negative 10%

6、阀体材料：不锈钢（316、316L）

6, body material: stainless steel (316, 316L)

7、密封材料：金属密封、四氟密封

7, sealing materials: metal sealing, PTFE sealing

8、连接方式：内螺纹或法兰

8. Connection: internal thread or flange

9、控制方式:常闭（通电打开）、常开(通电关闭)

9, control mode: normally closed (power on), normally open (power off)

10、电气连接：引线或接线盒式

10. Electrical connection: lead or junction box

11、使用电压：标准AC220V、DC24V、其它电压可选

11, the use of voltage: Standard AC220V, DC24V, other voltage optional

12、特殊选配：防爆电磁阀，防水电磁阀

12, special optional: explosion-proof solenoid valve, waterproof solenoid valve

13、安装提示：最好线圈竖直向上，也可根据需要任意安装

13, Installation Tips: the best coil vertical upward, can also be installed as needed

14、防护等级：IP65

14, protection level: IP65

15、工作制 ：100%ED

15, work system: 100%ED

16、工作形式:二位二通

16, work form: two bit, two pass

三、进口低温电磁阀优点：

Three, imports of low-temperature solenoid valve advantages:

进口低温电磁阀具有,寿命长：此阀结构简单，故障少，维修方便，阀芯由特种不锈钢制成，耐磨性好，耐超低温。本产品采用不锈钢阀芯，在长时间不动作情况下启动阀门，动作迅速，快速切断；线圈长时间通电，发热量低，不会烧毁，功耗底，节能；零压启动，零泄漏。

imported low temperature electromagnetic valve has long service life: This valve has simple structure, little trouble and convenient maintenance. The valve core is made of special stainless steel. It has good wear resistance and ultra low temperature. This product adopts stainless steel valve, start the valve does not move in a long time under the condition of quick action, quickly cut off the coil; long time power, low heat, not burning, low power consumption, energy saving; zero voltage starting, zero leakage.

四、进口低温电磁阀工作原理：

Four, imports of cryogenic solenoid valve working principle:

常闭：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

Normally closed: when the coil is energized, the pilot valve is pulled in, the pilot hole is opened, the valve cavity is relieved, and the piston is pressed by the medium pressure in the lower cavity. The solenoid valve is opened.

当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

When the coil is out of power, the pilot valve core is reset by the spring, the pilot hole is closed, the upper cavity of the valve is pressurized and reset by the piston orifice, and the thrust of the spring is closed.

常开：当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

Normally open: when the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the valve cavity is pressurized and reset by the piston orifice, and the thrust of the spring is closed.

当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

When the coil is out of power, the pilot valve core is reset by the spring, the pilot hole is opened, the valve cavity is relieved, and the piston is pushed by the medium pressure in the lower cavity, and the electromagnetic valve is opened.

注：出口端压力大于进口端压力，介质会反向导通。可安装止回阀。

Note: the outlet pressure is greater than the inlet pressure, the medium will reverse conduction. Fit check valve.

欢迎您访问我们www.hy-shh.com网站，首先感谢您对我们进口低温电磁阀的关注。如果您对我们的产品和服务有任何的建议或疑问，请立即联系我们，我们一定会尽心尽意为您提供优质满意的服务。

Welcome to visit our www.hy-shh.com website. First of all, thank you for your attention to our imports of cryogenic solenoid valves. If you have any suggestions or questions about our products and services, please contact us immediately, and we will do our best to provide you with quality and satisfactory service.