百方网
当前位置: 百方网 » 产品中心 » 仪器仪表 » 电工仪器仪表 » 南澳电气生产NAICG全自动雷电冲击电流发生器

南澳电气生产NAICG全自动雷电冲击电流发生器

南澳电气生产NAICG全自动雷电冲击电流发生器
品      牌: 南澳电气
单      价: 188000.00元/套面议
最小起订: 1 套
发货期限: 自买家付款之日起 35起 天内发货
所  在 地: 湖北省 武汉
供货总量: 999999 套
有效期至: 长期有效
联系我时,请提及在百方网看到,会有优惠。

公司基本资料信息

您还没有登录,请登录后查看联系方式
免费注册为会员后,您可以...
发布供求信息 推广企业产品
建立企业商铺 在线洽谈生意
还不是会员,立即免费注册
产品详细说明

NAICG type Automatic Lightning Impulse Current Generator   NAICG全自动雷电冲击电流发生器

产品简介

NAICG型冲击电流发生器主要用以检验电气设备耐受冲击电流稳定的能力,广泛应用于氧化锌避雷器阀片进行冲击电流试验,气象防雷也可以用于其它研究性试验。

NAICG型冲击电流发生器可产生4/10us、8/20us、10/350us、18/40us标准冲击电流波形,波形的技术指标符合国家标准和IEC标准的规定,产品通过部级鉴定,主要技术性能处于国内领先地位,达到国际同类产品的先进技术。

产品别名

冲击发生器,雷电冲击发生器,电压发生器,脉冲发生器

产品特性

1、体积小、结构紧凑、调波方便;  

2、输出电流大(4/10us波形达到120kA);

3、本装置采用下球气缸推动触发方式,同步性能好,动作可靠;

4、每只主电容器套管上都串有一只大能量的无感吸能电阻,确保主电容器的安全;

5、采用恒流充电计算机测量控制一体化系统,自动化程度高,抗干扰能力强。

主要产品参数

A、五种冲击电流波形发生器的主要技术参数

①额定电压:±60kV或4-120kV

②1/20us陡波冲击电流幅值20kA±5%

③4/1 0us冲击电流幅值100kA±5%

④8/20us雷电冲击电流幅值40kA±5%

⑤30/80us操作冲击电流幅值2kA±5%

⑥18/40us冲击电流幅值20kA±5%

B、六种冲击电流波形发生器的主要技术参数

①额定电压:±60kV或±120kV

②2000us方波冲击电流幅值1.5kA±5%

③1<20us陡波冲击电流幅值20kA±5%

④4/10us雷电冲击电流幅值100kA±5%

⑤30/80us操作冲击电流幅值2kA 4-5%

⑥18/40us冲击电流幅值20kA±5%

⑦18/40us冲击电流幅值20kA±5%

 

Product introduction

The impulse current generator is mainly used to test the stability of electrical equipment withstanding impulse current, it is widely used in impulse current test for zinc oxide surge arrester, meteorological lightning protection and other research trials.

The impulse current generator can produce 4/10us, 8/20us, 10/350us, 18/40us standard impulse current waveform, the technical specification of waveform is in line with national standards and IEC standards, and the product has passed the ministerial appraisal, the main technical performance is in the domestic leading position, has reached the advanced level of international similar products.

Also called name

Impulse Generator, lightning impulse, voltage pulse generator, pulse generator

The Characteristics of the products

(1) Small volume, compact structure, easy to adjust wave.

(2) High output current (4/10us waveform can reach 120kA);

(3) The device adopts the trigger mode which is driven by the under ball cylinder, the performance is good and the operation is reliable;

(4) The casing of each main capacitor is connected with a large non-inductive absorption power resistor to ensure the safety of the main capacitor;

(5) Adopting constant current charging of computer measurement and control integrated system, high degree of automation, strong anti-interference ability.

The parameters of the products

1、Five kinds of impulse current waveform generator

(1) Rated voltage: ± 60kV or 4 ~ 120kV

(2) The amplitude of 1 / 20us steep wave impulse current: 20kA ± 5%

(3) The amplitude of 1 / 10us impulse current: 100kA ± 5%

(3) The amplitude of 8 / 20us lightning impulse current: 40kA ± 5%

(4) The amplitude of 30 / 80us operating impulse current: 2kA ± 5%

(5) the amplitude of 18 / 40us impulse current:  20kA ± 5%

 

2、Six kinds of impulse current waveform generator

(1) Rated voltage: ± 60kV or ± 120kV

(2) The amplitude of 2000us rectangular impulse current: 1.5kA ± 5%

(3) The amplitude of 1 / 20us steep wave impulse current: 20kA ± 5%

(4) The amplitude of 4 / 10us lightning impulse current: 100kA ± 5%

(5) The amplitude of 30 / 80us operating impulse current: 2kA ± 5%

(6) the amplitude of 18 / 40us impulse current:  20kA ± 5%

 

 

NACWD Multi-ball Chopped Wave Set    NACWD多球截波装置

产品简介

NACWD通过冲击本体输出电压串级直流高电压,再经点火延时装置,触发截波最下一对点火球,该截波装置具有较宽的动作范围和较小的分散性,截波时间在2—5us范围内,截波时间分散性标准偏差不大于0.1us。

产品别名

多球截断装置

产品特性

截波装置具有较宽的动作范围和较小的分散性

产品参数

1.电压:200kV-2800kV

2.截波时间在2—5us范围内,截波时间分散性标准偏差不大于0.1us

 

Product introduction

NACWD output cascade DC high voltage through the impulse voltage generator, and then trigger the lowermost point fireball of the chopped wave through the ignition delay device, the chopped wave device has a wide range of motion and smaller dispersion, chopping time is within the range of 2 ~ 5US, standard error of the chopping time dispersion is less than 0.1US.

Also called name

Multi-level chopped wave

The Characteristics of the products

The chopped wave device has a wide range of motion and smaller dispersion

The parameters of the products

1.Voltage:200kV-2400kV

2.chopping time: 2 ~ 5us Standard error of the chopping time dispersion: ≤ 0.1us

NAICG全自动雷电冲击电流发生器试验装置
免责声明:以上所展示南澳电气生产NAICG全自动雷电冲击电流发生器的信息由自行提供,内容的真实性、准确性和合法性由发布企业负责。百方网建议优先选择由中国电器供应商提供的南澳电气生产NAICG全自动雷电冲击电流发生器
关于我们 | 广告服务 | 会员服务 | 隐私申明 | 友情链接 | 联系我们 | 法律顾问 | 网站地图 | 百方网信用评价制度 (c)2008-2021 BYF All Rights Reserved
网络标识
可信网站识